|
| |
Accessories
Bearings
Nylon Thrust Bearing •
Brass Washers •
Profile Bearings •
Prop Hanger •
Prop Shaft •
Rear_Motor_Hook
|
Nylon Thrust Bearing |
 On
rubber powered models, a precise bearing is important for
holding the prop shaft at the correct angle of thrust. |
|
Item # and Description |
|
#KP1002 - 1/8" white bearing for 1/32"
shaft
#KP1003 - 1/32" black bearing for 3/64"
shaft
#KP1004 - 1/4" black bearing for 3/64"
shaft |
|
|
|
|
|
Brass Bearing
(Washers) |
|
Item # and Description |
 PA031 .050 Center Hole 1/8" outside diameter with a .050
center hold is used with a 1/16" diameter prop shaft. - 8
per pack |
 PA068 .069 Center Hole 1/8" outside diameter with a .069 center hold is
used with a 3/64" diameter prop shaft. - 8 per pack |
|
|
|
|
|
Profile
Bearing |
|
Item # and Description |
|
DA014
These bearings are used with profile model airplanes, which
center the front of the motor on the fuselage. Pack of 3
pieces. |
|
|
|
|
|
Rear
Motor Hook |
|
Item # and Description |
|
DA046 - Small hook used primarily
for rubber motors up to about 3/16" . |
|
|
|
|
DA048 - Large hook used for rubber motors of 1/4"
or larger amounts of smaller diameter rubber. |
|
|
|
|
|
